22 Years of Expertise in Custom Labels & Packaging

Clothing Label Fold Types & Construction

Compare common clothing label constructions, visible sizes, seam allowances and artwork placement before specifying custom woven or printed labels for your garments.

Clothing Label Fold Types & Construction

A Fold Changes More Than the Shape

Fold construction influences how much artwork remains visible, where the label attaches, and how it sits against the garment. Choose the structure with the intended sewing position in mind.

01

Visible Artwork Area

Identify the portion of the label that can be seen after folding and stitching.

02

Seam Allowance

Allow space where the label is sewn, keeping important artwork clear of seams.

03

Front & Back Orientation

Confirm which face of the artwork is shown and how text reads when the label is attached.

04

Garment Comfort

Consider label placement, folded edges and appropriate material feel.

Finished Size Is Not the Flat Cut Size

A finished label measurement describes what remains after folding; the flat blank may need additional material for fold returns and sewing allowance. The amount varies by fold style, fabric and production method.

Centre Fold: Visible Face

Specify the finished visible face height, desired width and sewing allowance. Do not assume the flat length is exactly twice the visible height.

End Fold: Hidden Returns

Specify the visible centre width and the return allowance at both ends separately.

Straight Cut: Attachment Edge

Confirm whether the dimensions refer to the cut piece or the visible stitched area.

How to Choose the Right Label Construction

Start with where the label will be attached, what needs to remain visible and how the finished item will be handled. Use these recommendations to narrow down suitable construction options, then confirm the final specifications with physical samples.

Back Neckline

A brand label positioned at the back neckline should remain readable while fitting the collar seam and garment construction.

Consider
Center FoldEnd Fold
Key Checks Before Production

Check the visible face dimensions, front and reverse orientation, sewing allowances and potential contact with the wearer's skin.

Side Seam

A label sewn into a garment side seam needs suitable fold orientation, adequate attachment allowance and a comfortable finished edge.

Consider
Center FoldSingle Sided Fold
Key Checks Before Production

Review the seam position, visible information, folded thickness, edge finish and comfort against the garment.

Outer Hem / Edge

An externally visible brand label should present the artwork clearly while allowing secure attachment to the selected garment edge.

Consider
Straight CutEnd Fold
Key Checks Before Production

Confirm the visible dimensions, attachment method, finished edges and stitch placement before production.

Accessories & Bags

Labels used on accessories, bags or textile products may require different attachment allowances and construction details from standard garment seam labels.

Consider
Straight CutEnd Fold
Key Checks Before Production

Review the substrate, attachment surface, sewing method, label dimensions and expected handling conditions.

Unequal Fold Allowances

Some garment designs need an asymmetrical construction because the available sewing space or required visible area differs between attachment points.

Consider
Long-Short Sided FoldWide-Narrow FoldSingle Sided Fold
Key Checks Before Production

Provide the intended fold geometry, visible face dimensions, individual fold allowances and an approved construction reference.

Special Hanging or Shaped Construction

Certain applications call for a shaped label presentation or attachment sections that differ from conventional symmetrical folds.

Consider
Hang FoldUp-Down Fold
Key Checks Before Production

Confirm the actual folded sample, attachment tabs, fold direction, stitch locations and compatibility with the garment construction.

Continuous Roll Supply

Some manufacturing workflows require label tape in continuous rolls for later cutting, sewing or conversion rather than individually folded pieces.

Consider
Roll
Key Checks Before Production

Specify tape width, artwork repeat length, roll winding direction, cutting references and subsequent processing requirements.

Position Artwork for the Folded Result

The flat artwork file should show where each printed or woven element lands after folding. Treat folds and sewing as part of the design, not an afterthought.

Front & Reverse Panels

Mark intended readable faces, direction and whether information appears on both sides.

Fold Lines

Identify folds as reference guides; do not print guide lines as part of the design.

Stitch / Safety Zone

Keep essential logo elements and small text outside the agreed sewing region.

Orientation Proof

Review a folded mockup before finalizing production artwork.

Review a Folded Sample Before Approval

A physical reference helps identify how a flat design behaves when cut, folded and attached. Review the finished example on the actual garment where feasible.

Readability

Check logo and lettering at the size seen after sewing.

Construction

Examine folds, edges and consistency of the expected shape.

Sewing Fit

Check whether the label can be attached at the intended seam or edge.

Comfort & Handling

Consider the folded material against the wearer or product.

What to Include in Your Fold Specification

Send a concise fold brief so the finished sample, dimensions and attachment details can be reviewed together.

01

Fold Type

Straight cut, centre fold, end fold, loop fold or confirmed alternative

02

Finished Dimensions

Visible width and height, plus measurement units

03

Flat Artwork

Current file with front/reverse orientation and fold guides

04

Sewing Position

Neck, side seam, exterior hem or other attachment location

05

Material & Finish

Woven or printed construction and any specified edge finish

06

Estimated Quantity

Quantity per design, size and variation

Discuss Your Label Requirements

Label Fold Types FAQs

Technical answers to common questions about folded clothing labels and artwork setup.

Have more questions? Visit all FAQs
What is the difference between centre fold and end fold labels?

A centre fold typically folds the label across its midpoint to form two faces, while an end fold turns the two ends to the back to make attachment tabs. The best choice depends on the visible face, garment position and sewing method.

How do I calculate the flat size of a folded label?

Start with the required finished dimensions, identify each fold return and allow for any agreed sewing area. The exact flat dimensions depend on construction and production method, so approve a dimensioned drawing rather than applying one formula to all folds.

Which fold type is suitable for a T-shirt neckline?

Centre-fold and certain other folded constructions are common considerations, but suitability depends on the neckline seam, required label presentation, fabric and wearer comfort. Confirm the intended attachment with your garment manufacturer.

Does a folded label need a sewing allowance?

Labels sewn into a garment generally require an appropriate attachment area. Its size varies with the fold type, material and sewing method, and should be agreed before artwork approval.

Can the same artwork be used for different fold styles?

The brand graphics may be reusable, but the artwork layout often needs adjustment because different folds change visible panels, fold lines and attachment zones. Review a new proof for each construction.

What details should I send when ordering folded labels?

Provide the chosen fold, finished dimensions, artwork orientation, attachment location, material preference, color references, quantity and any approved sample or drawing. QTTAG can review the requirements for feasibility.

Make Every Fold Work for Your Garment

Share your garment application, label artwork, visible dimensions and preferred fold construction with QTTAG. We can review practical options for your custom woven or printed labels.